|
Various types of roofing nails
Introduction
Roofing nails also called clout nails are usually used in the roof. They can made of low carbon steel wire, copper, aluminum, stainless steel and so on. They have different finish, to fit the customers’ requirements.
Specification
Material: Iron(Q195, Q235), cooper, aluminum, stainless steel, etc.
Length: 1"-3".
Point: Diamond point.
Head diameter: 14mm-20mm.
Shank diameter: 2.10mm-4.19mm.
Usual size: 9×2-1/2", 9×2".
Shank Type: Smooth, ring and screw.
Surface treatment: Galvanized, color galvanized, polish and so on.
Roofing Nails Specification
Specification Length (mm) Rod diameter (mm) Head diameter (mm)
8G×2" 50.8 4.19 20
8G×2-1/2" 63.5 4.19 20
8G×3" 76.2 4.19 20
9G×1-1/2" 38 3.73 20
9G×2" 50.8 3.73 20
9G×2-1/2" 63.5 3.73 20
9G×3" 76.2 3.73 20
10G×1-3/4" 44.5 3.37 20
10G×2" 50.8 3.37 20
10G×2-1/2" 63.5 3.37 20
11G×1-1/2" 38 3.02 18
11G×1-3/4" 44.5 3.02 18
11G×2" 50.8 3.02 18
11G×2-1/2" 63.5 3.02 18
12G×1-1/2" 38 2.74 18
12G×1-3/4" 44.5 2.74 18
12G×2" 50.8 2.74 18
13G×11/2" 38 2.38 15
13G×13/4" 44.5 2.38 15
13G×2" 50.8 2.38 15
14G×13/4" 40 2.1 14Three aluminum roofing nails
Roofing nails made of aluminum wireThree copper roofing nails
Roofing nails made of copper wireSeveral roofing nails from stainless steel wire
Stainless steel roofing nailsTwo roofing nails from galvanized wire
Galvanized roofing nailsA screw shank roofing nail
Roofing nail with screw shankA ring shank roofing nail
Roofing nail with ring shank
A smooth shank roofing nail
|
